Double 6.5″ Thumping Trumping sound that fits both vertically and horizontally between standard 2″ X 4″ studs. They include revolutionary Infinity Edge Grilles that allow the grille to be inserted and locked in either vertical direction.
The easy to install WSLCRFL series speakers are a full range In-Wall loudspeaker that incorporates high tech woofer materials with a butyl rubber surround and a state-of the-art Diffractionless pivoting dome Ferrofluid cooled tweeter. This prevents distortion caused by bounce from the baffle The pivoting tweeter allows for deeper penetration into the room and aimable concentrated sound to the sweet spot.
Driver Material: MetaPlex™
• This is an electronically bonded substrate on a copolymer cone. Basically it is a trilaminate cone, the first layer is a copolymer base material. The second layer is a material that allows the third layer (green colored surface) to bond to the copolymer.
• Copolymer cones alone are found in other speakers. The key to our material is that the green coating allows for a well damped material (the first layer) to combine with a low mass high stiffness coating (the green layer). This improves the performance by stiffening a cone material that is normally used alone in entry level speakers. Better midrange performance and less bass distortion is the result from less cone breakup.
Tweeter Material: Silk Dome Tweeter
• Our silk dome tweeters use a treated silk soft dome. This material is neutral sounding and is used in many higher end bookshelf and cabinet speakers.