• LEDs provide information about system status and signal strength for
    alignment in Bridge mode
  • Hardware Reset button
  •  Outdoor Rated down to -40°F
  •  High Power Indoor/Outdoor CPE with Qualcomm® Atheros Chipset
    – Range up to 6 miles away with line of sight
  • Supports the following operation modes:
    Bridge, Access Point, Router and Repeater


The ANCP3005Q Wireless CPE Bridge allows for transmitting signal from IP cameras up to 6 miles away (line-of-sight)*. By utilizing a Qualcomm chipset and the 5.8GHz WiFi spectrum, the ANCP3005Q is not susceptible to the usual interference and signal issues that other wireless bridges can encounter.

You can also power a single IP camera by utilizing the PoE output port on the ANCP3005Q, which can save the trouble of running another CAT5 cable to power the camera.

CPU Qualcomm AR9344 560Mhz CPU
SE2576L PA Chipset – 64MB DDR2 / 16MB SPI
Antenna Integrated Dual 14dBi Antennas
Wi-Fi Standards IEEE802.11a/an
RF Output Power 200mW (23dBm)
RF Sensitivity -96dBm
RF Frequency 802.11a/n: 5.180Ghz – 5.825Ghz
Bandwidth 300Mbps
Physical Ports 1 x 10/100 Mbps WAN Ethernet Port
1 x 10/100 Mbps LAN Ethernet Port
1 x Toggle switch for PoE output for IPC
1 x Reset Button
LED Indicators Power / WAN / LAN / Wi-Fi
Level Signal Strength
Power PoE 802.3at/af
Adapter: 48V PoE Power Adapter
Power consumption <8W
Installation Methods Pole Mounting, Wall Mounting or Rack Mounting
Product Dimensions 10.2” x 3.1” x 2.1” (262mm x 80mm x 53mm)
Net weight 0.7lbs
Working Environment -40˚F ~ 131˚F / 10% ~ 90% RH, Non-condensing
Storage Environment -58˚F ~ 167˚F / 5% ~ 90% RH, Non-condensing

Additional information

Weight 1.5 lbs


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.